Home
 
           
 

 

Spraying Systems Co.®

RotoClean®

The RotoClean attachment provides a quick and easy method of unclogging spray tips without removing them from the spray gun in airless painting and high pressure spraying applications.

The RotoClean attaches to the spray gun and includes a tungsten carbide orifice insert which can be rotated 180° by the RotoClean handle to face the opposite direction. This rotation allow obstruction to be blown out the larger opening in the back of the tip as liquid passes through the spray gun.

 

UniJet® Spray Nozzle System

UniJet Nozzles consist of a nozzle body, a spray tip, and a tip retainer. Additional components such as strainers, check valves, special adapters and metering orifices can also be included in the assembly.

Nozzle Bodies: Standard UniJet nozzle bodies have pipe thread (male or female) inlet connections in 1/8" to 1/2" sizes. All outlet connections are 11/16" male thread to fit UniJet tip retainers and adapters.The UniJet system also provides special nozzle bodies. Nozzle bodies with hose shanks, swivels, split-eyelet clamps, adjustable mounting clamps and diaphragm check valves are all available.

Spray Tips: UniJet spray tips off a wide selection of spray patterns, capacities, and materials. Flat spray, full cone, hollow cone and solid stream patterns, as well as metering orifices and atomizing tips are all available in the UniJet system. Capacities range from 0.003 to 25 gpm (0.01 to 94 l/min).

Tip Retainers: UniJet tip retainers fit all UniJet nozzle bodies. Tip retainers hold spray tips and other nozzle components firmly in place. Adapters with 11/16"-16 inlet thread are available with NPT or BSPT outlets, hose shank connections and wall mount connections for use in place of standard retainers.

 

VeeJet® Spray Nozzles - Standard Type

Standard VeeJet nozzles feature a high impact solid stream or flat spray pattern with spray angles of 0° to 110°.

They produce a uniform distribution of small to medium-sized droplets.

Specially tapered spray pattern edges provide even spray coverage when several nozzles with overlapping patterns are required.

 

 

Model 6815 piston type pressure relief valves are available in 1/2" or 3/4" sizes with operating pressures to 700 psi (48.2 bar). An extra large valve passage provides full flow through the valve passage with minimum pressure loss. A free floating seat design improves overall speed and sensitivity of the valve action.

 

 

Quick Opening - Self Closing Valve

A normally closed, quick opening valve, often referred to as a "Whistle Valve". This valve has been in service for many years on agricultural and industrial applications, for both compressed air and liquid. The valve body is heavy cast brass with internal components of machined brass. The standard valve disc and O-ring are Buna-N. Teflon and Viton seals are available on most sizes. Springs are stainless steel.

Maximum working pressure, 400 PSIG, @ 60°F.
Maximum working temperature, 200°F.
Not recommended for steam service.
 
Pipe Sizes Available: 1/4"-3/8"-1/2"-3/4"-1"-1 1/4"

For further information, please contact:

Denver Industrial Sales & Service Company

850 South Lipan Street
Denver, CO 80223
Ph. (303) 935-2485 · Fax (303) 935-6787
Toll Free (877) 935-2485
    
   
Home | About Us | Products | Services | Contact Us | Links