Home
 
           
 

 

 

Alemite Air - Operated Pumps

Alemite's Modern Material Pumping Systems (MM/PS) have proven themselves to provide the best performance for the value unequaled in the industry.

Alemite's pneumatic powered reciprocating piston pumps can dependably handle a wide variety of waterproofing and roof coatings. Materials may be pumped from their original containers or bulk storage tanks with proper mounting and piping configurations.

Alemite MM/PS pumps have two component parts - air motors and down tubes. Designed and built for heavy-duty service and long life. Alemite pumps have these features.

Economical Operation - Using an average of 4 - 6 CFM of air per gallon of material pumped, only the required amount is pumped and there is no material waste. Pumps operate only on demand.

Separated design - Pumped material cannot enter the air motor so contamination is not possible.

Double-Action / Positive Displacement - Material is pumped on both up and down piston strokes for uniform flow.

Pump Model No. (1) 7886-A 7886-B 7886-S 7896-A 7896-B 7896-S
Pump Material (2)     303 SS     303 SS
Container Size (Gallons) 55 5 55 55 5 55
Recommended Continuous Delivery (GPM) 7 3/4 7 3/4 7 3/4 4 4 4
Maximum Free Flow Delivery (GPM) (4) 13 (A) 13 (A) 13 (A) 7 (A) 7 (A) 7 (A)
Actual Cycles Per Gallon 30 30 30 30 30 30
Actual Fluid Oz. Displacement Per Cycle 4.27 4.27 4.27 4.27 4.27 4.27
Air Consumption (CFM/GAL) (5) 9 9 9 16 1/4 16 1/4 16 1/4
Maximum Material Pressure (PSI) 2200 2200 2200 4400 4400 4400
Pump Ratio 11:1 11:1 11:1 22:1 22:1 22:1
Air Motor Size (Inches) 4 1/4 4 1/4 4 1/4 6 6 6
Air Inlet & Outlet (NPTF) (6) 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
Down Tube Type (7) PP PP PP PP PP PP
Down Tube Packing Material Buna-N Buna-N Teflon Buna-N Buna-N  
Teflon Packing Kit No. (8) 331916 331916 STD 331916 331916 STD
Pipe Adapter Kit No. (8) 331917 331917 NA 331917 331917 NA
Material Outlet (NPTF) 1" 1" 1" 1" 1" 1"
Pump Weight (Pounds) 65 48 65 76 60 76
Pump Height (Inches) 63 43 53 63 43 63

NOTES

(1) All pumps are furnished with Quick-Detach air coupler and connector. Pumps are furnished with bung adapter.

(2) Pumps are made of standard steel unless otherwise marked. SS indicates Stainless Steel.

(3) Construction materials meet FDA and 3A sanitary standards.

(4) Materials pumped at 75° F and 100 psi air pressure

(A) 10W oil, 350 SSU @ 75° F.

(5) Air consumption given at 75 psi air pressure and recommended delivery.

 

For further information, please contact:

Denver Industrial Sales & Service Company

850 South Lipan Street
Denver, CO 80223
Ph. (303) 935-2485 · Fax (303) 935-6787
Toll Free (877) 935-2485

 

 

    
   
Home | About Us | Products | Services | Contact Us | Links