Home
 
           
 

Crafco Hot Applied Sealant Selection Guide

Product Name
Product Description
Specification



34200
Self leveling stiff and flow resistant. Suited for pedestrian & slow moving traffic areas within the recommended climates. Applied using a pressure feed melter/applicator or pour pot. (Parking Lot Sealant)
Crafco Specification
 



34201 Not self leveling. Contains vulcanized rubber and polymers. Use 034518 on highways, streets and airfields. Applied using a pressure feed melter/applicator. (RoadSaver 201) ASTM D6690 Type 11, AASHTO M301
 
   



34202 Free flowing, self leveling. When applied it is a stiff, flow resistant yet flexible product. Suited for pedestrian & slow moving traffic areas within the recommended climates. Applied using a pressure feed melter/applicator or pour pot. (Parking Lot Sealant Type 1) Crafco Specification
 
 



34203 Medium viscosity. Good multi use sealant when used within recommended temperature limits. Applied using either a pressure feed melter/applicator or pour pot. (RoadSaver 203)
ASTM D6690 Type 1, AASHTO M173
 
   



34211 Free flowing, self leveling. Resists cracking in winter and flow and pick up in summer temperatures. Applied using either a pressure feed melter/applicator or pour pot. (RoadSaver 211) ASTM D6690 Type 1, AASHTO M173
 
 



34221 Free flowing, self leveling. Flexible compound that resists cracking R 34526 in winter and is resistant to flow and pick up at summer temperatures. Applied using either a pressure feed melter/applicator or pour pot. (RoadSaver 221) ASTM D6690 Type 11, AASHTO M301
 
   



34222 Free flowing, self leveling. Flexible compound that resists cracking in winter and is resistant to flow and pick up at summer temperatures. Applied using either a pressure feed melter/applicator or pour pot. (RoadSaver 222) ASTM D6690 Type III, ASSHTO M301
 
   



34231 Free flowing, self leveling. High degree of elongation at low temperatures while resistant to flow at summer temperatures. Due to softness it is not recommended for parking lots or areas with high levels of foot traffic. Applied using either a pressure feed melter/applicator or pour pot. (RoadSaver 231) ASTM D6690 Type IV
 
   



34241 High viscosity, non self leveling product. Contains 18% rubber by weight of asphaltic components. Resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator. (Asphalt Rubber Plus) ASTM D669O Type 1, AASHTO M173
 
   



34244 High viscosity, non self leveling product that resists sags into joints and cracks. Contains 18% rubber by weight of asphaltic components. Resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator. (Asphalt Rubber Plus Type 2) ASTM D6690 Type 1, AASHTO M173 Modified
 
   



34250 High viscosity, non self leveling, contains polyester fiber (Polyfiber). High adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Polymer content improves both high and low temperature properties. Applied using a pressure feed melter/applicator. (Poly Fiber Type 3) Crafco Specification
 
   



34515 Free flowing, self leveling. High adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator. Best performance SHRP tests. (RoadSaver 515) ASTM D6690 Type 1, AASHTO M173 Modified
 
   



34516 Medium viscosity product that flows and penetrates cracks. Highly adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Improved summer temperature pickČ up resistance, quick set up time and improved low temperature flexibility. Easier application. Applied using a pressure feed melter/applicator or pour pot. (Poly Flex Type 1) ASTM D5078
 
   



34517 Free flowing, self leveling. High heat resistant, can stand up to 288C without degradation. Highly adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Can be heated in direct fired single walled kettles. (Crafco DF) ASTM D5078
 
   



34518 Medium viscosity product that flows and penetrates cracks. Low viscosity for easy application, quick set up time, and improved low temperature flexibility. Highly adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator or pour pot. (Poly Flex Type 2) ASTM D5078, AASHTO D5978
 
   



34522 Free flowing, self leveling. Highly adhesive and flexible product that has a high degree of elongation at low temperatures while resisting flow at summer temperatures. Not recommended for parking lots or pedestrian areas. Applied using a pressure feed melter/applicator or pour pot. (RoadSaver 522) Crafco Specification
 
   



34521 Medium viscosity product that flows and penetrates cracks. Low viscosity for easy application, quick set up time, and improved low temperature flexibility. Highly adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator or pour pot. (Poly Flex Type 3) Crafco Specification
 
   



34526 Medium viscosity product that flows and penetrates cracks. Highly resistant to tracking or pick up by vehicle tires in hot weather. Easy application, improved summer pick up resistance, quick set up time and improved temperature flexibility. Applied using a pressure feed melter/applicator. (Poly Flex Type 4) Crafco Specification
 
   



34532 Free flowing, self leveling. Highly adhesive and flexible product that resists cracking in winter and flow at summer temperatures. Applied using a pressure feed melter/applicator or pour pot. Can be melted in a double boiler or small direct fired melter Premium product (Superflex) Crafco Specification
 
   



34533 Low viscosity, self leveling, easily penetrates narrow cracks. Resistant to cracking in winter. Highly resistant to tracking or pick up by vehicle tires in hot climate. Applied using a pressure feed melter/applicator or pour pot. Can be melted in a double boiler or small direct fired melter Premium product. (Superflex HT) Crafco Specification
 
   



34902 Non sag product, jet blast resistant, applied using bulk dispensing system units. 10+ year life. (RoadSaver Silicone) ASTM D5893
 
   



34903 Low modulus, jet blast resistant, self leveling silicone. Applied using bulk dispensing system units. 10+ year life. (RoadSaver Silicone SL) ASTM D5893
 
   



34656 Hot applied single component, self leveling, fuel resistant product. 10+ year life. (SuperSeal Low Mod) Crafco Specification
 
   



34655 Hot applied, self leveling, fuel resistant product. 6+ years life. (SuperSeal 1614A) ASTM D3581, ASTM D1854, SS-S-1614A
 
   



34651 Hot applied, self leveling, fuel resistant product. 6+ years life. (SuperSeal 444/777) ASTM D3569, ASTM D3406, AASHTO M282
 
   



Also see: Sealant Selection Guide

For further information, please contact:

Denver Industrial Sales & Service Company

850 South Lipan Street
Denver, CO 80223
Ph. (303) 935-2485 · Fax (303) 935-6787
Toll Free (877) 935-2485

 

 

    
   
Home | About Us | Products | Services | Contact Us | Links