NEW 2024 KM Crack Jet II, Asphalt Heat Lance IN STOCK
The KM Crack Jet II Asphalt Heat Lance cleans and dries the crack while etching the walls all in one convenient motion allowing you to do more with less. The KM Crack Jet II eliminates the need for large compressors, routers, and wire wheels and brings those units into one self-contained, and affordable asphalt heat lance. Heat lances, when used properly can extend the service life of crack and joint sealants.
FEATURES:
Heat: 2800˚ F of heat dries moisture in seconds
Pressure: 90 CFM of pressure cleans debris and vegetation
Portability: Designed to walk behind, tow, or, 35 Ft of Hose allows user to walk with just the wand, making even tight spaces easy to access
Adhesion: Etching walls results in maximum rubber adhesion
Improved Efficiency: Reduces time and labor costs
Asphalt Heat Lance SPECIFICATIONS:
Dimensions (L x W x H) – 55.5” x 28” x 36” Weight – 225 Lbs. Air Temperature and Output – 2800˚F @ 90 CFM Construction – Welded 11G Steel Wand – Stainless steel barrel and fittings Wand Weight – 7Lbs. Wand Length – 60” Engine – 5.5HP Honda *Specifications are subject to change without notice
**IN STOCK** NEW 2024 KM International KM 8000T 4-Ton Asphalt Hotbox Trailer w/ Ext Deck HOT HOT HOT $67,675.00 + Tax
**IN STOCK** NEW 2024 KM International KM 8000T 4 ton asphalt hotbox trailer mounted reclaimer capable of maintaining asphalt temperatures for up to 3 days, and it can reclaim excess or bulk-stored hot mix asphalt. The KM 8000T asphalt hotbox trailer is the perfect unit for larger repairs such as saw cuts, skin patching, and utility cut repairs. See Video.
This KM 8000T TEDD Model is a 4 ton asphalt hotbox with Extended Deck to accommodate the carrying of a KM 2-18X Infrared asphalt heater.
This unit also includes a hydraulic dump hoist, its diesel fired with electric brakes, solvent tank, tool rack and pail holder and rear mounted propane torch with hose reel. It even includes a 12 VDC electric hoist to load and unload the KM 2-18X Infrared Asphalt Heater.
If you’re looking for an all-in hot box with infrared heater for repair of asphalt pavements this, is it.
ADD an KM 2-18X Infrared. There’s plenty of room to haul it with the extended deck.
Dimension (L x W x H) – 18’ x 95.5” x 94” (Dimensions May Vary Based On Options) Weight – 4,325 Lbs. Capacity – 8,000 Lbs. Heating element – Propane: 58,000 BTU or Diesel: 105,000 BTU Filling Door – Dual insulated filling door, Dual cantilever handle Shovel Door – Dual insulated shovel door Insulation – 2”-3” of high efficiency insulation Construction – All welded: 16G Skin, 12G asphalt compartment Trailer Capacity – 14,000 Lbs. GVWR Axle – Dual 7,000 Lb., standard electric brakes Tire and Wheels – 3,520 LR E (each) Warranty – 2-year warranty on parts and workmanship 5-year warranty of trailer frame structure *Specifications subject to change without notice
**IN STOCK** The KM 8000T 4 ton asphalt hotbox trailer mounted reclaimer capable of maintaining asphalt temperatures for up to 3 days, and it can reclaim excess or bulk-stored hot mix asphalt. The KM 8000T asphalt hotbox trailer is the perfect unit for larger repairs such as saw cuts, skin patching, and utility cut repairs. See Video.
This KM 8000T is a 4 ton asphalt hotbox TEDD Model with Extended Deck to accommodate the carrying of a KM 2-18X Infrared asphalt heater.
This unit also includes a hydraulic dump hoist, its diesel fired with electric brakes, solvent tank, tool rack and pail holder and rear mounted propane torch with hose reel. It even includes a 12 VDC electric hoist to load and unload the KM 2-18X Infrared Asphalt Heater.
If you’re looking for an all-in hot box with infrared heater for repair of asphalt pavements this, is it.
**Any Price Listed excludes applicable sales taxes and delivery charges from DISSCO to FOB destination. Freight to destination shall be quoted at time of sale.
KM International 2025 KM 2-18X Infrared Asphalt Heater, New, $11,970.00 + taxes & shipping
The KM International KM 2-18X Infrared Asphalt Heater, is a Lightweight Infrared Asphalt Heater that is a compact infrared asphalt recycler and features 23 square feet of heating area. The KM 2-18X is the perfect infrared recycler for repairing cold seams or roller marks on new paving jobs and other small- to mid-size asphalt defects.
Overall Dimensions (L x W x H) – 7′ x 59.5″ x 37″ Overall Weight – 455Lbs. Heating Element – 1” Ceramic Refractory Blanket Heating Zones – (2) 3’6” x 3’6” Battery – 12V Deep Cycle Marine Gel BTU Output – 300,000 BTU *Specification subject to change without notice
The Equipment
All KM International equipment is 100% American Made, more specifically Michigan made. As a proud Michigan based manufacturer the entire KM International takes extreme pride in the equipment manufactured and distributed. At KM International being the best starts with manufacturing the most innovative and reliable product offerings in the industry. All KM International equipment is built from the ground up in North Branch, MI and goes through extensive quality testing after each manufacturing phase to ensure no detail is overlooked. During the manufacturing process KM uses only the highest quality materials and equipment. The KM staff receives extensive training on a monthly basis to ensure the quality of the equipment will never be compromised. The quality of KM equipment is why we are able to offer industry leading warranties on our entire product line.
Are you looking for a ready to go seal coat applicator? The Seal-Rite 700 XP sealcoat rig is just the ticket with all the bells and whistles.
The Seal-Rite SR-700 XP a 700 gallon steel tank with 7 gauge heads, 10 gauge sidewalls and reinforced tank ends. The SR-700XP Trailer comes complete with our hydraulic agitation system and spray system so all you need to do is add sealer and go to work.
This trailer also comes standard with 2-5/16″ height adjustable ball hitch, 29 Gallon Water Tank Assembly WITH PUMP FLUSH option, 41″ Brush Box, adjustable hitch, swivel hose reel, loading ramp, wand holder, tool cribs, 9 gallon fuel tank, LED lighting
700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
2 5/16” adjustable coupler with 20,000 lb. capacity, a breakaway switch and adjustable 26,400 lb. safety chains
Brush box
61″ x 35″ loading ramp
Enclosed tongue and metal front deck with removable swing open gate on one side for equipment storage
29 gallon plastic water tank with 5 gpm Wilden air- operated, dual-diaphragm pump, 50’ of hose and a nozzle
FLUSH OUT System installed.
30 gallon air compressor powered by an electric start Honda GX Series motor
50’ of air hose and a quick connect
Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
9 gallon fuel tank with 10’ of hose and a nozzle
Two 7,000 lb. E-Z Lube axles, both equipped with electric brakes and 16” load range E, 10 ply tires on 8 hole wheels
25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads
3 gallon filter pot that reduces down time
Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand
Brake lights, running lights, a center light bar and a lighted license plate bracket
700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
2 5/16” adjustable coupler with 20,000 lb. capacity, a breakaway switch and adjustable 26,400 lb. safety chains
Brush box
61″ x 35″ loading ramp
Enclosed tongue and metal front deck with removable swing open gate on one side for equipment storage
29 gallon plastic water tank with 5 gpm Wilden air- operated, dual-diaphragm pump, 50’ of hose and a nozzle
30 gallon Jenny air compressor powered by an electric start HondSeries motor
50’ of air hose and a quick connect
Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
9 gallon fuel tank with 10’ of hose and a nozzle
Two 7,000 lb. E-Z Lube axles, both equipped with electric brakes and 16” load range E, 10 ply tires on 8 hole wheels
25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads
3 gallon filter pot that reduces down time
Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand
Brake lights, running lights, a center light bar and a lighted license plate bracket.
The 2 Gallon Pour Pot is a man portable container designer the allow the crack sealing professional to manually transport hot crack sealant from a gravity pour melter to a crack or joint and by utilizing the finger-controlled valve mechanism allow the operator to maintain a controlled flow of hot crack sealing material into the crack or joint. For professional use only.
The Billy Goat Grazor is designed to help facilitate the cleaning and removal of weeds and debris from cracks or joints. The Grazor is a gas powered, manually push operated unit that spins a 10” wire wheel at 3600 RPM that cleans the dirt and debris out of the joint and helps clean the oxidization and aged asphalt off the sides of the joint so as to allow the sealant to gain improved adhesion. Proper eye protection is required. For professional use only.
The Billy Goat 13 HP Force Blower is designed to blow the dirt and debris off pavement areas to help clean the pavement surface prior to seal coat application. The Billy Goat 13 HP Force Blower is a commercial grade blower designed for use by the do-it-yourselfer to the professional contractor. The Billy Goat 13 hp Force Blower is powered by a 13 HP Honda gas engine and delivers air at over 200 MPH thru an operator controlled thrust nozzle that will move most types of debris found on parking areas. For professional use only.
The Crafco Model 30 Router is a wheeled non-self-propelled pavement cutter designed to enlarge the crack or joint to create a larger reservoir so the installed crack sealant can provide longer lasting performance. The Crafco Model 30 can be used on any crack seal project regardless of size wherever longer sealant life is desired. The Crafco Model 30 is powered by a 30 HP Kohler gas powered engine. The Cutter head is clutch operated and holds 6 cutter bits that can cut routed joints in sizes ranging from ½” to 1-1/2” wide to ½” deep to 1-1/2” deep. Under normal operation a set of bits will cut 15,000 to 25,000 lineal feet of crack or joint. Cutter bits are sold separately. For professional use only.
The Crafco 10 Gallon Wheeled Bander is Direct Fired 10-gallon wheeled melter that is manually push operated with a dispensing valve at ground level to facilitate application of crack sealant directly into the crack or joint. The Crafco 10 Gallon Wheeled Bander is designed for entry level and/or smaller contractors or do-it-yourselfers for use on driveways, small parking lots and/or small airport ramp areas. The Crafco 10 Gallon Wheeled Bander has a melt rate of approximately 60 to 120 lbs per hour. Sealant discharge is provided by a operator controlled valve. Heat control is manually operated with a visual dial thermometer and a hand operated agitator. Propane bottle not provided. Crack sealant sold separately. For professional use only.
The Crafco 30 Gallon Direct Fire Melter is a small skid mounted 2-man portable propane fired crack seal melter. The Crafco 30 Gallon Direct Fire Melter is designed as an entry level crack sealing melter for smaller contractors and/or do-it-yourselfers for use on driveways, small parking lots and/or smaller street projects such as trailer parks or smaller airport ramp areas. The Crafco 30 Gallon Direct Fire Melter has a melt capacity of approximately 120 to 250 lbs of crack sealant per hour. Sealant discharge is provided thru a manually operated 2” spigot gravity pour valve outlet. Heat control is manually operated with a visual dial thermometer and a hand operated agitator. Propane bottle not provided. Crack sealant sold separately. For professional use only.
