Calculators

X/Twitter

This field is for validation purposes and should be left unchanged.

Select a measurement system(Required)

Select Matrix type(Required)

Matrix 501 is typically sold in the United States. Matrix 502 is typically sold outside the United States.

Maximum joint depth in inches

Maximum joint depth in millimeters

Joint width in inches

Joint width in millimeters

Joint length in feet

Joint length in meters

Percent waste to plan for

10 = 10%, the recommended figure.

Results

Adhesive Material needed (Part #33346)

Pounds

Backer Rod Needed (feet)

Part #34609 – Total feet needed, supplied in 6ft sections.

Surfacing Aggregate Needed (lbs)

Part #33375SA

Matrix 501 material needed (Part #33345)

Pounds

Matrix 502 binder needed (Part #34528 or 34529)

Pounds

Part #34528 is the standard grade used in cool to moderate climates, that meets the polymer modified asphalt requirements of ASTM D6297. Part No. 34529 is a stiffer formulation for hotter climates and high traffic areas. Your Crafco representative can help you decide which best meets your use case.

Structural aggregate needed (Part #33033)

Pounds

Bridging Plate Material Needed (feet)

No overage applied. To be sourced locally.

Locating Pins Needed

1 per foot of length. To be sourced locally. We advise using 16d nails.

Results

Provided in Metric units for convenience. If you submit your calculations for a quote, the estimates will be converted to US Imperial units.

Metric

Imperial Conversion

Adhesive material needed (Part #33346)

Kilograms

Adhesive material needed (Part #33346)

Pounds

Backer Rod Needed (Part #34609)

Total meters needed. Supplied in 1.83m/6ft sections.

Backer Rod Needed (Part #34609)

Total feet needed. Supplied in 1.83m/6ft sections.

Surfacing Aggregate Needed (Part #33375SA)

Kilograms

Surfacing Aggregate Needed (Part #33375SA)

Pounds

Matrix 501 material needed (Part #33345)

Kilograms

Matrix 501 material needed (Part #33345)

Pounds

Matrix 502 binder needed (Part #34528 or #34529)

Kilograms

Matrix 502 binder needed (Part #34528 or #34529)

Pounds

Structural aggregate needed (Part #33033

Kilograms

Structural aggregate needed (Part #33033)

Pounds

Bridging plate material needed

Meters. No overage applied. To be sourced locally.

Locating Pins Needed

1 per US foot of length. To be sourced locally. We advise using 16d nails.

This field is for validation purposes and should be left unchanged.

Select measurement system(Required)

This field is hidden when viewing the form

Imperial

Patching material(Required)

Select a material from the dropdown to begin.

This field is hidden when viewing the form

Pounds per cubic foot

Not visible

Patch depth in inches(Required)

Patch width in feet(Required)

Patch length in feet(Required)

Percent waste to plan for(Required)

(i.e. 1 equals 1%. Larger jobs typically have less waste; smaller jobs have more waste.)

Pounds needed

TechCrete Primer Needed (Gallons)

This field is hidden when viewing the form

Metric

Patching material(Required)

Select a material from the dropdown to begin.

This field is hidden when viewing the form

Pounds per cubic foot

Not visible

Patch depth in mm(Required)

Patch width in meters(Required)

Patch length in meters(Required)

Percent waste to plan for(Required)

(i.e. 1 equals 1%. Larger jobs typically have less waste; smaller jobs have more waste.)

Kilograms needed

Provided for convenience. Please use pounds (below) when placing an order.

Pounds needed

Please provide this number when ordering. If you submit the form below to request a quote, all of the information above will be included.

TechCrete Primer needed (Liters)

Provided for convenience. Please use gallons (below) when placing an order.

TechCrete Primer needed (Gallons)

Please provide this number when ordering. If you submit the form below to request a quote, all of the information above will be included.

Sealant Calculator

Use our sealant calculator to estimate the amount of materials you will need for your project.

“*” indicates required fields

Name

This field is for validation purposes and should be left unchanged.

Select measurement system*

This field is hidden when viewing the form

Imperial

Sealant Type*

Select a sealant from the dropdown menu.

Sealant Pounds Per Gallon

Updates automatically from Sealant Type dropdown.

Linear Crack Distance in Feet*

Average width of crack in inches*

(i.e. 0.5 equals ½ inch; cracks should not exceed 1.5 inch wide)

Average depth of crack in inches*

(i.e. 1 equals 1 inch)

Average width of overband in inches*

(i.e. 3 equals 3 inches; 3 inch overband is recommended)

Average depth of overband in inches*

(i.e. 0.0625 equals 1/16 inch; 1/16 inch is recommended)

Percent waste to plan for*

(i.e. 1 equals 1%; larger jobs typically have less waste and smaller jobs have more waste)

Pounds of Sealant Needed

Please provide this number when ordering sealant.

This field is hidden when viewing the form

Metric

Sealant Type*

Select a sealant from the dropdown menu.

Sealant Pounds Per Gallon

Updates automatically from Sealant Type dropdown.

Linear crack distance in meters*

Average width of crack in millimeters*

Cracks should not exceed 38mm wide.

Average depth of crack in millimeters*

Average width of overband in millimeters*

76mm overband is recommended.

Average depth of overband in millimeters*

1.6mm is recommended

Percent waste to plan for*

(i.e. 1 equals 1%; larger jobs typically have less waste and smaller jobs have more waste)

Kilograms of sealant needed

Provided for easy visualization. Please use pounds (below) when ordering sealant.

Pounds of sealant needed

Please provide this number when ordering sealant.

Joint Adhesive Calculator+

Matrix 501/502 Calculator+

Results

Results

Metric

Imperial Conversion

Patching Calculator+

Imperial

Metric

Sealant Calculator+

Sealant Calculator

Imperial

Metric

Sealcoating Job Calculator+

Imperial

Results

Metric

Results

Sealcoating Tank Calculator+

Imperial

Results

Metric

Results