Category: Equipment

The KM CrackJet is engineered for the decerning professional looking to improve performance of hot applied crack sealants. The KM CrackJet is a walk behind or tow self-contained special purpose unit for the purpose of not only cleaning debris out of joints but also heating the joint to remove moisture combined with conditioning the oxidation present of old existing asphalt binders to ensure improved adhesion of newly installed hot applied sealants. 

The KM CrackJet is designed as a self-contained unit on a cart with an air compressor and propane bottle with a removable heat lance for the professional desiring to work on driveways and commercial lots without having to haul around a large trailer or truck mounted air compressor. 

The KM CrackJet is perfect for entry level installers looking to move into heat lance operations without a large expenditure.  

Features

Heat: Produces up to 2800˚ F of heat dries moisture in seconds

Pressure: 90 CFM of air volume cleans debris and vegetation

Accessibility 35 Ft of Hose allows users to walk with just the wand, making even tight spaces easy to access 

Specification 

Dimensions; (L x W x H) – 55.5” x 28” x 36”

Weight; 225 Lbs.

Air Temperature and Output;  2800˚F @ 90 CFM

Construction; Welded 11G Steel

Wand; Stainless steel barrel and fittings

Wand Weight; 7Lbs.

Wand Length; 60”

Engine; 5.5HP Honda

Sale Price: $5,115.00 + taxes and shipping (LP bottle not included)

The Gingway 30 Direct Fired Crack Seal Melter is a non-insulated, entry level crack seal melter designed for small jobs, driveways and commercial parking lots. 

Gingway’s 30 Gallon Direct Fired Crack Seal Melter can provide hot material in 30 minutes or less. It is built with 14 ga. steel. Standard features include temperature gauge with guard, built in hand agitator, lifting handles, and hinged lid. Comes with a 50,000 BTU burner, 10′ hose, regulator, striker, and draw-off valve. The kettle is capable of melting up to 1200 lbs. of sealant per day.

Specifications & Dimensions

Capacity: 30 gallons

Length: 45”

Width: 26”

Height: 38”

Empty Weight 200 lbs

Sale Price: $1,475.00 + taxes and shipping

A top quality insulated portable melter designed for small jobs for the professional working on driveways and commercial parking lots. The insulated body allows the melter to come to operating temperature 30% quicker than uninsulated units. Burner is manually controlled with a mechanical thermometer with an adjustable pilot allowing the main burner to be idled for stoppages in work. 

Easy to handle and/or load and unload out of a truck or trailer. Cleasby is the Cadilac of the industry, built with heaver gauge materials for the professional that desires to own equipment for the long term. 

Product information

Length 58” (46” with burner removed)

Width 22”

Height 35”

Empty weight 220 lb

Fuel Propane

Sele Price $3,250.00 + taxes and shipping

The Gingway MA-10 is a 10 Gallon Direct Fired Melter/Applicator for the install of hot applied crack sealants. The MA-10 is a non-insulated, entry level crack seal melter designed for small jobs and driveways,

Gingway’s MA10 Melter/Applicator is a fast and efficient method for the application of hot applied crack sealants. It can also apply materials from stationary kettles or any large melter. It can be used without heat for cold pour materials. It is capable of melting and applying 600 lbs. of sealant per day.

Gingway’s MA10 is the result of over 25 years of experience in the manufacture and design of melter applicators. Both inner and outer tanks are built of heavy 14 ga. steel. Standard features include temperature gauge with guards, built in hand agitator, 1/4″ thick steel wheels, propane bottle platform, (bottle not included), spring loaded hand controlled release valve, 3″ steel screed, and a stop plate to prevent “stringers” at the end of a run. It comes with 50,000 BTU burner, 6′ hose, regulator, and striker.

Specifications & Dimensions

Capacity: 10 gallons

Length: 47”

Width: 27”

Height: 36”

Empty Weight 130 lbs

Sale Price: $1,295.00 + taxes and shipping

FOR SALE, 2001 International 9100i, Day Cab, Vin 2HSCEAHR71C091079, Cummins L10-410 hp (recently rebuilt), Eaton Fuller 10 speed, 12,000 lb front, 40,000 lb rear, Twin Screw, Differential Lock, 4.10 Ratio. Air Ride Suspension, Dump Valve, Stationary 5^th wheel, 200” Wheelbase, Air Conditioning, Cruise Control, AM/FM Stereo, Single 100 gal Aluminum Tank, Aluminum Headache Rack, Visor, Tires 295-75R/22.5 at 90%+ on Alcoa Aluminum Rims, 527,898 Odometer miles, Good Clean Truck, always starts, Located in Denver CO. FOR SALE for $18,700.00 No Warranty, Sold As-Is, Where-Is. 

FOR SALE 2009 Crafco SS125DC70 Super Shot 125 Diesel Melter with Onboard Air Compressor. 125 gal hot oil jacked sealant tank, 1,460 hours, County owned, Isuzu diesel engine, Tier II, Murphy switch, engine cover, 70 CFM Air Compressor, Electric headed hoes and wand, 2-5/16” ball hitch, 6 pin round style light plug, toolbox, good tires, strobe light, stainless steel air hose reel w/ 100 ft ½” hose, good material pump, Dealer serviced and Sold AS-IS, WHERE-IS, in Working Order and in Ready to Go to Work Condition at time of delivery, FOR SALE for $27,270.00 + D&H + Freight & Taxes.

FOR SALE 1989 Cimline 225 gal Crack seal Melter. Gasoline engine, Propane fired, Agitated, 2” Roper Pump with hose and wand. For Sale $6,500.00 + D&H + Freight & Taxes.

FOR SALE 2007 Crafco SS125D Super Shot 125 Diesel Melter, 2,304 Hours, City owned, Isuzu diesel engine, Tier II, all oils serviced, 125 gal hot oil jacketed sealant tank, de-coked and clean tank, good pump, NEW 18’ Electric headed hose and wand, engine cover, new decals, 18” hitch extension, 2-1/2” Pintle, 3/8” safety chain hooks, 7 pin RV style light plug, gravity pour outlet, good tires. Fully reconditioned to factory specification and sold in like new working order. FOR SALE $28,570.00 + D&H + Freight & Taxes. Sold in ready to go to work conditions at time of delivery with 30-day parts only Limited Warranty**

FOR SALE, 2024 KM International T-2 Recycler, Demo Unit, LIKE NEW, 26.6 hours on engine. 9.0 hours on burner. The KM T-2 is an asphalt recycling machine capable of producing 4 tons of hotmix asphalt in an hour. The KM T-2 asphalt recycler trailer will recycle asphalt millings, chunks, and other RAP material into plant-grade asphalt. The KM T-2 allows contractors the ability to perform year-round repairs with quality hotmix asphalt material. Product asphalt for $15-25 a ton compared to $60-75 at the plant or $110 + for cold patch. Produces a ton plus every 15-20 minutes. Recycle millings into plant-quality or better mix year-round. NO DIRECT FLAME IMPINGEMENT ON MATERIAL. Skip the long lines and hassle at the asphalt plant by using the T-2 to produce HMA at your shop or on the job site.

FOR SALE $93,879.00 FOB Denver, CO. + D&H + Freight & Taxes (if applicable). Sold with one-year Limited Warranty*.

FOR SALE 2022 Crafco SS250D Super Shot 250 Diesel Melter, 2,572 hours, Rental unit, (still in service hours may change), fleet maintained, Isuzu diesel engine, Tier IV, de-coked and pump replaced at 2,100 hours, 250 gal oil jacketed sealant tank, tandem torsion axles, good pump w/ 5+ GPM, electric heated hose and wand, insulated engine cover, 18” hitch extension, 2-1/2” pintle, 7 pin RV style light plug, class II strobe light, gravity pour outlet, 60% tires. Recent service. FOR SALE $49,570.00 + D&H + Freight & Taxes. Sold AS-IS, WHERE-IS, in Working Order and in Ready to Go to Work Condition at time of delivery,