Category: Rental Equipment

The 2 Gallon Pour Pot is a man portable container designer the allow the crack sealing professional to manually transport hot crack sealant from a gravity pour melter to a crack or joint and by utilizing the finger-controlled valve mechanism allow the operator to maintain a controlled flow of hot crack sealing material into the crack or joint. For professional use only.

The Billy Goat Grazor is designed to help facilitate the cleaning and removal of weeds and debris from cracks or joints. The Grazor is a gas powered, manually push operated unit that spins a 10” wire wheel at 3600 RPM that cleans the dirt and debris out of the joint and helps clean the oxidization and aged asphalt off the sides of the joint so as to allow the sealant to gain improved adhesion. Proper eye protection is required. For professional use only.

The Billy Goat 13 HP Force Blower is designed to blow the dirt and debris off pavement areas to help clean the pavement surface prior to seal coat application. The Billy Goat 13 HP Force Blower is a commercial grade blower designed for use by the do-it-yourselfer to the professional contractor. The Billy Goat 13 hp Force Blower is powered by a 13 HP Honda gas engine and delivers air at over 200 MPH thru an operator controlled thrust nozzle that will move most types of debris found on parking areas. For professional use only.

The Crafco Model 30 Router is a wheeled non-self-propelled pavement cutter designed to enlarge the crack or joint to create a larger reservoir so the installed crack sealant can provide longer lasting performance. The Crafco Model 30 can be used on any crack seal project regardless of size wherever longer sealant life is desired. The Crafco Model 30 is powered by a 30 HP Kohler gas powered engine. The Cutter head is clutch operated and holds 6 cutter bits that can cut routed joints in sizes ranging from ½” to 1-1/2” wide to ½” deep to 1-1/2” deep. Under normal operation a set of bits will cut 15,000 to 25,000 lineal feet of crack or joint. Cutter bits are sold separately. For professional use only.

The Crafco 10 Gallon Wheeled Bander is Direct Fired 10-gallon wheeled melter that is manually push operated with a dispensing valve at ground level to facilitate application of crack sealant directly into the crack or joint. The Crafco 10 Gallon Wheeled Bander is designed for entry level and/or smaller contractors or do-it-yourselfers for use on driveways, small parking lots and/or small airport ramp areas. The Crafco 10 Gallon Wheeled Bander has a melt rate of approximately 60 to 120 lbs per hour. Sealant discharge is provided by a operator controlled valve. Heat control is manually operated with a visual dial thermometer and a hand operated agitator. Propane bottle not provided. Crack sealant sold separately. For professional use only.

The Crafco 30 Gallon Direct Fire Melter is a small skid mounted 2-man portable propane fired crack seal melter. The Crafco 30 Gallon Direct Fire Melter is designed as an entry level crack sealing melter for smaller contractors and/or do-it-yourselfers for use on driveways, small parking lots and/or smaller street projects such as trailer parks or smaller airport ramp areas. The Crafco 30 Gallon Direct Fire Melter has a melt capacity of approximately 120 to 250 lbs of crack sealant per hour. Sealant discharge is provided thru a manually operated 2” spigot gravity pour valve outlet. Heat control is manually operated with a visual dial thermometer and a hand operated agitator. Propane bottle not provided. Crack sealant sold separately. For professional use only.

The Crafco Patcher II is a trailer mounted 200-gallon oil jacketed mastic mixer designed for contractor and agency use for application of hot applied aggregate filled mastics for wide gap repair and/or any large pavement deformities or repairs that exhibit extreme movement or are too big for regular crack seal. Average heat up time is approximately 1-1/2 hours +/-. The Isuzu diesel powered Crafco Patcher II is an oil jacked, diesel fired melter with power agitation with a 6-inch lever operated slide gate opening for discharge of the mastic material. Other features include digital temperature control, mast mounted strobe light, 2-1/2” pintle hitch with 18” extension and 7 pin RV style trailer light plug connector. Mastic sold separately. For professional use only.

The Crafco SS250D is a trailer mounted 250-gallon crack sealant melter designed for contractor or agency use for crack sealing larger parking lots, municipal streets, airports, county roads and State highways with a melt capacity of 2,000 pounds per hour. Average heat up time is approximately 1 hour. The Isuzu diesel powered Crafco SS250D is an oil jacked, diesel fired melter with power agitation, electric heated hose and wand with pump on demand. Other features include digital temperature control, mast mounted strobe light, gravity pour outlet, 2-1/2” pintle hitch with 18” extension and 7 pin RV style trailer light plug connector. Crack sealant sold separately. For professional use only.

Crafco Super Shot 125 Diesel Melter

The Crafco SS125D is a trailer mounted 125-gallon crack sealant melter designed for contractor or agency use for crack sealing driveways, parking lots, airports and small municipalities with a melt capacity of 900 pounds per hour. Average heat up time is approximately 1 hour. The Isuzu diesel powered Crafco SS125D is an oil jacked, diesel fired melter with power agitation, electric heated hose and wand with pump on demand. Other features include digital temperature control, mast mounted strobe light, gravity pour outlet, 2-1/2″ pintle hitch with 18″ extension and 7 pin RV style trailer light plug connector. Crack sealant sold separately. For professional use only.